Inspection Procedure
- Check the door lock control switch circuit using DTC check. (See DTC B1211 / 11: POWER WINDOW MASTER SWITCH ECU COMMUNICATION STOP
)
OK: Proceed to next circuit inspection shown on problem symptoms table. (See PROBLEM SYMPTOMS TABLE )
OK: Go to next step
- Check the door lock control switch (See INSPECTION
).
NG: Replace the door lock control switch.
OK: Go to next step
- Check wire harness and connector between door lock control switch and passenger door ECU.
NG: Repair or replace wire harness or connector.
OK: Go to next step
- Check wire harness and connector between door lock control switch and power window master switch.
NG: Repair or replace wire harness or connector.
OK: Proceed to next circuit inspection shown on problem symptoms table (See PROBLEM SYMPTOMS TABLE ).