Timing Belt: Remove & Replace
WARNING: This page is about the IS 300 Base, Automatic, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 3.2 | B | |||
| Combination Procedure: CAMSHAFT GEAR OR SPROCKET: Remove & Replace: | ||||
| Both,Intake & Exhaust | Includes: R&I Valve Covers. | 2.1 | B | |
| One,Intake or Exhaust | Includes: R&I Valve Cover. | 1.8 | B | |
| Combination Procedure: CAMSHAFT SEAL: Remove & Replace: | ||||
| Both,Intake & Exhaust | Includes: R&I Valve Covers. | 2.5 | B | |
| Each | 0.3 | B | ||
| One,Intake or Exhaust | Includes: R&I Valve Covers. | 2.3 | B | |
| Combination Procedure: CRANKSHAFT GEAR OR SPROCKET: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: TIMING BELT IDLER PULLEY: Remove & Replace: | ||||
| Each | 0.1 | B | ||
| Combination Procedure: TIMING BELT TENSIONER: Remove & Replace: | ||||
| 0.1 | B | |||
| Combination Procedure: WATER PUMP: Remove & Replace: | ||||
| Automatic Trans | 0.5 | B | ||