Charging Systems: Charging: Generator: Replacement

REPLACE FRONT BEARING
1. Remove the 4 screws and bearing retainer.
  
  Fig 1: Remove Screws & Bearing Retainer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a socket wrench and press, press out the bearing.
  
  Fig 2: Pressing Out Bearing Using Socket Wrench & Press
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using SST and a press, press in a new bearing.
  1. SST 09950-60010 (09951-00500)
    
    Fig 3: Pressing In New Bearing Using SST & Press
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the bearing retainer with the 4 screws.
  1. Torque: 3.0 N.m (31 kgf.cm 27 in.lbf)
REPLACE REAR BEARING
1. Using SST, remove the bearing cover (outside) and bearing.
  1. SST 09820-00021
  NOTE: Be careful not to damage the fan.
  
  Fig 4: Removing Bearing Cover (Outside) & Bearing Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bearing cover (inside).
3. Place the bearing cover (inside) on the rotor.
  
  Fig 5: Replacing Bearing Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Using SST and a press, press in a new bearing.
  1. SST 09820-00031
  Fig 6: Pressing In New Bearing Using SST & Press
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Using SST, push in the bearing cover (outside).
  1. SST 09285-76010
  Fig 7: Pushing In Bearing Cover (Outside) Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002