Is 300
OXYGEN SENSOR HEATER
| TLT | CID | Unit Conversions | Description of Test Data | Description of Test Limit |
|---|---|---|---|---|
| 1 | $01 | Multiply by 0.000076 [A] | Maximum heated oxygen sensor heater current (Bank 1 Sensor 1) | Malfunction criteria for heated oxygen sensor heater |
| 1 | $02 | Multiply by 0.000076 [A] | Maximum heated oxygen sensor heater current (Bank 1 Sensor 2) | Malfunction criteria for heated oxygen sensor heater |
| 1 | $10 | Multiply by 0.000076 [A] | Maximum heated oxygen sensor heater current (Bank 2 Sensor 1) | Malfunction criteria for heated oxygen sensor heater |
| 1 | $20 | Multiply by 0.000076 [A] | Maximum heated oxygen sensor heater current (Bank 2 Sensor 2) | Malfunction criteria for heated oxygen sensor heater |
THERMOSTAT
| TLT | CID | Unit Conversions | Description of Test Data | Description of Test Limit |
|---|---|---|---|---|
| 1 | $01 | Multiply by 0.625 and minus 40°C | Engine coolant temperature | Malfunction criteria for thermostat |
FRONT HO2S VOLTAGE MONITOR
| Test ID | Test Items | Descriptions | Unit Conversions | Units | Standards |
|---|---|---|---|---|---|
| $07 | MIN O2S V | Minimum HO2S (sensor 1) voltage | Multiply by 0.005 | V | Less than maximum TEST LIMIT |
| $08 | MAX O2S V | Maximum HO2S (sensor 1) voltage | Multiply by 0.005 | V | More than minimum TEST LIMIT |
FRONT HO2S FREQUENCY MONITOR (IDLING)
| Test ID | Test Items | Descriptions | Unit Conversions | Units | Standards |
|---|---|---|---|---|---|
| $38 | Time $38 | Average time per cycle of heated oxygen sensor voltage | Multiply by 0.04096 | Second | Between minimum and maximum TEST LIMIT |
FRONT HO2S FREQUENCY MONITOR (CRUISE)
| Test ID | Test Items | Descriptions | Unit Conversions | Units | Standards |
|---|---|---|---|---|---|
| $90 | Time $90 | Remained value of that average of switching frequency is subtracted from average of switching frequency threshold | Multiply by 0.04096 plus 5.2 | Second | 5.2 to 10.4 |
REAR HO2S VOLTAGE MONITOR
| Test ID | Test Items | Descriptions | Unit Conversions | Units | Standards |
|---|---|---|---|---|---|
| $07 | MIN O2S V | Minimum rear HO2S voltage | Multiply by 0.005 | V | Less than maximum TEST LIMIT |
| $08 | MAX O2S V | Maximum rear HO2S voltage | Multiply by 0.005 | V | More than minimum TEST LIMIT |
O2S TEST RESULT
| Test ID | Test Items | Descriptions | Unit Conversions | Units | Standards |
|---|---|---|---|---|---|
| $31 | Time $31 | Average time that rear HO2S output switches from Lean to Rich | Multiply by 0.04096 | Second | Less than maximum TEST LIMIT |
| $32 | Time $32 | Average time that rear HO2S output switches from Rich to Lean | Multiply by 0.04096 | Second | Less than maximum TEST LIMIT |
REAR HO2S SLOW RESPONSE MONITOR
| Test ID | Test Items | Descriptions | Unit Conversions | Units | Standards |
|---|---|---|---|---|---|
| $37 | Time $37 | Time until HO2S voltage drops to 0.2 V during fuel-cut | Multiply by 0.04096 | Second | Less than maximum TEST LIMIT |
REAR HO2S ELEMENT MONITOR
| Test ID | Test Items | Descriptions | Unit Conversions | Units | Standards |
|---|---|---|---|---|---|
| $81 | Time $81 | Percentage in monitor time while HO2S voltage is below 0.05V | Multiply by 0.390 | % | Less than maximum TEST LIMIT |
| $84 | Time $84 | Percentage in monitor time while HO2S voltage is 0.7V or more | Multiply by 0.390 | % | More than minimum TEST LIMIT |
| $85 | Time $85 | Continuous time that HO2S voltage is 0.45V or more | Multiply by 0.26214 | Second | More than TEST LIMIT |
| $87 | Time $87 | Percentage in monitor time while HO2S voltage is 0.45V or more | Multiply by 0.390 | % | More than TEST LIMIT |
CATALYST
| TLT | CID | Unit Conversions | Description of Test Data | Description of Test Limit |
|---|---|---|---|---|
| 0 | $01 | Multiply by 0.0078 [No dimension] | Catalyst deterioration level (bank 1): Determined by waveforms of HO2S sensor 1 and sensor 2 | Malfunction criteria for catalyst deterioration |
| 0 | $02 | Multiply by 0.0078 [No dimension] | Catalyst deterioration level (bank 2): Determined by waveforms of HO2S sensor 1 and sensor 2 | Malfunction criteria for catalyst deterioration |
EVAP
| TLT | CID | Unit Conversions | Description of Test Data | Description of Test Limit |
|---|---|---|---|---|
| 1 | $01 | Multiply by 0.0916 [mmHg] | Fuel tank pressure change during vacuum introduction | Malfunction criteria for EVAP VSV |
| 1 | $02 | Multiply by 0.0458 minus 2.93 [mmHg] | Fuel tank pressure change at switching over canister closed valve (CCV) and pressure switching valve (bypass VSV) | Malfunction criteria for CCV and bypass VSV |
| 0 | $03 | Multiply by 0.0458 [mmHg] | Fuel tank pressure change monitored by vapor pressure sensor | Malfunction criteria for 0.04 inch leak |
| 0 | $04 | Multiply by 0.0458 [mmHg] | Fuel tank pressure change monitored by vapor pressure sensor | Malfunction criteria for 0.02 inch leak |