LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2005 >> LS 430 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (On-Vehicle Service) >> Transmission Revolution Sensor >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Revolution Sensor: Replacement

  1. REMOVE TRANSMISSION REVOLUTION SENSOR (NC0 SENSOR) 
    1. Disconnect the transmission revolution sensor connector.
    2. Remove the bolt and transmission revolution sensor.
    3. Remove the O-ring from the transmission revolution sensor.
    Fig 1: Removing Bolt And Transmission Revolution Sensor
    G02997358Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE TRANSMISSION REVOLUTION SENSOR (SP2 SENSOR) 
    1. Disconnect the transmission revolution sensor connector.
    2. Remove the bolt and transmission revolution sensor.
    3. Remove the O-ring from the transmission revolution sensor.
    Fig 2: Removing Bolt And Transmission Revolution Sensor
    G02997359Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL TRANSMISSION REVOLUTION SENSOR (SP2 SENSOR) 
    1. Coat a new O-ring with ATF and install it to the transmission revolution sensor.
    2. Install the transmission revolution sensor with the bolt.
      1. Torque: 5.4 N.m (55 kgf.cm, 48 in..lbf) 
    3. Connect the transmission revolution sensor connector.
    Fig 3: Installing Transmission Revolution Sensor With Bolt
    G02997360Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL TRANSMISSION REVOLUTION SENSOR (NC0 SENSOR) 
    1. Coat a new O-ring with ATF and install it to the transmission revolution sensor.
    2. Install the transmission revolution sensor with the bolt.
      1. Torque: 5.4 N.m (55 kgf.cm, 48 in..lbf) 
    3. Connect the transmission revolution sensor connector.
    Fig 4: Installing Transmission Revolution Sensor With Bolt
    G02997361Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals