Inspection Procedure
- CHECK BASIC FUNCTION
- Check that the door control transmitter and driver's door lock can control all the doors to lock and unlock normally.
HINT:
- If the transmitter does not normally work, go to step A.
- If the driver's door lock does not normally work, go to step B.
- If both of them work normally, go to step C.
- A: CHECK WIRELESS DOOR LOCK CONTROL SYSTEM (See PRECAUTION )
- B: CHECK POWER DOOR LOCK CONTROL SYSTEM (See PRECAUTION )
- C: GO TO NEXT STEP.
- Check that the door control transmitter and driver's door lock can control all the doors to lock and unlock normally.
- CHECK MANUAL UP/DOWN FUNCTION
- Check that the manual UP/DOWN function using the master switch and each regulator switch can operate all the power windows.
- NG: OTHER PROBLEM (See PROBLEM SYMPTOMS TABLE )
- OK: Go to next step.
- CHECK REMOTE UP/DOWN FUNCTION
- Check that the remote UP/DOWN function using the master switch can operate the power windows.
- NG: OTHER PROBLEM (See PROBLEM SYMPTOMS TABLE )
- OK: REPLACE MULTIPLEX NETWORK BODY ECU