Torque Specification
WARNING: This page is about a different car, the 2005 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE CONTROL SYSTEM TORQUE SPECIFICATION
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Throttle body assy x Intake air connector | 11 | 112 | 8 |
| Air cleaner cap sub-assy x Air cleaner case sub-assy | 5.0 | 51 | 44 in.lbf |
| V-bank cover sub-assy x Cylinder head cover sub-assy LH | 7.9 | 81 | 70 in.lbf |
| Knock sensor x Cylinder block sub-assy | 20 | 199 | 14 |
| Water outlet x Cylinder head sub-assy | 15 | 153 | 11 |
| Water outlet x Cylinder head LH | 15 | 153 | 11 |
| Engine mounting stay RH x Water outlet | 23 | 235 | 17 |
| Engine mounting stay RH x Engine mounting bracket CTR | 23 | 235 | 17 |
| Intake manifold x Cylinder head sub-assy | 15 | 153 | 11 |
| Intake manifold x Cylinder head LH | 15 | 153 | 11 |
| Ground cable x Intake manifold | 8.4 | 86 | 74 in.lbf |
| ECM bracket No. 2 x ECM | 3.0 | 31 | 27 in.lbf |
| ECM bracket x ECM | 3.0 | 31 | 27 in.lbf |
| ECM x Instrument panel reinforcement | 13 | 133 | 10 |
| ECM x Blower assy | 13 | 133 | 10 |
| Accelerator pedal rod assy x Body | 7.5 | 76 | 66 in.lbf |