Crankshaft Position Sensor: Installation

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CRANKSHAFT POSITION SENSOR
1. Apply a light coat of engine oil to the O-ring on the crankshaft position sensor.
2. Install the crankshaft position sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
3. Connect the crankshaft position sensor connector.
INSTALL COMPRESSOR AND MAGNETIC CLUTCH
HINT:

(See INSTALLATION )
INSTALL GENERATOR ASSEMBLY
HINT:

(See INSTALLATION )

Fig 1: Identifying Crankshaft Position Sensor Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002