Ignition Switch/Steering Lock: Replacement

HINT:

The installation is in the reverse order of the removal.

1. REMOVE FRONT DOOR SCUFF PLATE OUTSIDE LH (See  REPLACEMENT  ) 
2. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSY LOWER (See  REPLACEMENT  ) 
3. REMOVE IGNITION OR STARTER SWITCH ASSY 
   1. Disconnect the ignition switch connector and unlock warning switch connector.
   2. Remove the clamp.
   3. Remove the 2 screws and ignition switch.
      Fig 1: Removing 2 Screws And Ignition Switch

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002