Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

DRAIN ENGINE COOLANT (See ON-VEHICLE INSPECTION )
REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE NO. 2 AIR CLEANER INLET (See REMOVAL )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER CASE SUB-ASSEMBLY (See REMOVAL )
REMOVE ENGINE COOLANT TEMPERATURE SENSOR
1. Remove the engine coolant temperature sensor connector.
2. Remove the engine coolant temperature sensor.
  
  Fig 1: Locating Engine Coolant Temperature Sensor With Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002