How To Proceed With Troubleshooting

HINT:

• Use these procedure to troubleshoot the multiplex communication system.
• The hand-held tester should be used in step  2.

1. VEHICLE BROUGHT TO WORKSHOP 
   1. Go to next step. 
2. CHECK DIAGNOSTIC TROUBLE CODE (See  DIAGNOSTIC TROUBLE CODE TABLE   ) 
   1. Check for DTCs and note any codes that are output.
   2. Delete the DTC.
   3. Recheck for DTCs. Try to prompt the DTC by simulating the original activity that the DTC suggests.
      1. If the DTC does not reoccur, proceed to A.
      2. If the DTC reoccurs, proceed to B.
   1. C: Go to step   4 
   2. A: Go to next step. 
3. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. See TERMINALS OF ECU 
4. ADJUST, REPAIR OR REPLACE 
   1. Go to next step. 
5. CONFIRMATION TEST 
   1. END