Inspection Procedure
- CHECK MANUAL UP/DOWN FUNCTION
- Check that the manual UP/DOWN function using the master switch and regulator switch can operate all the power windows.
OK: Manual UP/DOWN function operates normally.
- NG: OTHER PROBLEM (See POWER WINDOW DOES NOT OPERATE ON DRIVER SIDE )
- OK: Go to next step.
- Check that the manual UP/DOWN function using the master switch and regulator switch can operate all the power windows.
- CHECK FOR DTC
- Operate the ignition switch. Check if DTC B2780 is output.
Result:
DTC OUTPUT RESULTResult Proceed to DTC B2780 is not output A DTC B2780 is output B
- NG: Go to ENGINE IMMOBILIZER SYSTEM (See DTC B2799: ENGINE IMMOBILIZER SYSTEM MALFUNCTION )
- OK: Go to next step.
- Operate the ignition switch. Check if DTC B2780 is output.
- CHECK OPERATION OF FRONT DOOR COURTESY LAMP SWITCH ASSY
- Check that the map lamp illuminates when the driver side door is opened.
OK: Map lamp illuminates normally.
- NG: Go to LIGHTING SYSTEM (See HOW TO PROCEED WITH TROUBLESHOOTING )
- OK: REPLACE MULTIPLEX NETWORK DOOR ECU FRONT LH
- Check that the map lamp illuminates when the driver side door is opened.