Charging System (3MZ-FE): Precaution
- SYSTEM INITIALIZATION NOTE: When disconnecting the negative (-) battery terminal, initialize the following systems after the terminal is reconnected.SYSTEM NAME AND PAGE NUMBER
System Name See Power Window Control System PRE-CHECK Sliding Roof System RESET - Check that the battery cables are connected to the correct terminals.
- Disconnect the battery cables if a quick charge is given to the battery.
- Do not perform tests with a high voltage insulation resistance tester.
- Never disconnect the battery while the engine is running.
- Check that the charging cable is tightened on terminal B of the generator and the fuse box.
- Do not check whether the alternator generates current or not with terminal F connected to the other terminals.