Service Data
Starting And Charging Service Data
| Starter assy | ||
| Specified current | 90 A or less at 11.5 V | |
| Commutator depth | Standard | 3.1 mm (0.122 in.) |
| Maximum | 3.8 mm (0.150 in.) | |
| Brush length | Standard | 9.0 mm (0.354 in.) |
| Maximum | 4.0 mm (0.158 in.) | |
| Snap ring length | 5.0 mm (0.197 in.) | |
| Starter relay | ||
| Resistance | 3 - 5 | 10 kΩ or higher |
| 3 - 5 (Apply battery voltage to terminals 1 and 2) | Below 1 Ω | |
| Battery | ||
| Voltage | Standard | 12.5 to 12.9 V at 20°C (68°F) |
| Generator assy | ||
| Rotor coil resistance | at 20°C (68°F) | 2.3 to 2.7 Ω |
| Slip ring diameter | Standard | 14.2 to 14.4 mm (0.559 to 0.567 in.) |
| Minimum | 14.0 mm (0.551 in.) |