LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> GS 300 AWD >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control >> Yaw Rate Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Yaw Rate Sensor: Removal

  1. REMOVE CONSOLE UPPER PANEL GARNISH FRONT (See  REMOVAL  ) 
  2. REMOVE FRONT CONSOLE UPPER PANEL ASSEMBLY (See  REMOVAL  ) 
  3. REMOVE CONSOLE BOX PLATE (See  REMOVAL  ) 
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (See  REMOVAL  ) 
  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See  REMOVAL  ) 
  6. REMOVE CONSOLE BOX REGISTER ASSEMBLY (See  REMOVAL  ) 
  7. REMOVE CONSOLE BOX (See  REMOVAL  ) 
  8. REMOVE CONSOLE BOX NO.2 DUCT 
    1. Remove the 2 clips and the console box No.2 duct.
      Fig 1: Identifying Clips And Console Box No.2 Duct
      G04025246Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE CONSOLE BOX NO.1 DUCT 
    1. Remove the clip and the console box duct No.1.
      Fig 2: Identifying Clip And Console Box Duct No.1
      G04025247Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE YAW RATE SENSOR 
    1. Disconnect the yaw rate sensor connector.
    2. Separate the 2 wire harness clamps.
    3. Remove the 2 bolts and yaw rate sensor.
      NOTE: Do not remove the sensor from the bracket.
      Fig 3: Identifying Yaw Rate Sensor
      G04025248Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals