Torque Specifications
DRIVE SHAFT - TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Front wheel set nut | 103 | 1,050 | 76 |
| Front drive shaft x Front axle hub nut | 294 | 2,998 | 217 |
| Lower ball joint assembly x Steering knuckle | 120 | 1,224 | 89 |
| Tie rod assembly x Steering knuckle | 65 | 663 | 48 |
| Front drive shaft center bearing set bolt | 32 | 330 | 24 |
| Rear wheel set nut | 103 | 1,050 | 76 |
| Speed sensor rear x Rear axle carrier sub-assembly | 8.5 | 87 | 75 in.*lbf |
| Speed sensor wire rear x Toe control link sub-assembly | 6.0 | 61 | 53 in.*lbf |
| Rear drive shaft x Rear axle shaft nut | 290 | 2,957 | 214 |
| Rear axle carrier sub-assembly x Rear disc brake caliper | 54 | 551 | 40 |
| Load sensing valve sensor bracket x Rear suspension arm assembly No.2 | 27 | 275 | 20 |
| Rear suspension member brace x Body | 50 | 510 | 37 |
| Differential support protector No.2 x Rear suspension member | brace | 5.4 | 55 48in.*lbf |
| Parking brake cable assembly No.3 x Body | 19 | 194 | 14 |