Problem Symptoms Table
HINT:
- Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- The combination meter is based on the premise that the supplemental restraint system (SRS) is operating normally. Check the SRS first before troubleshooting the seat belt warning system.
Seat belt warning system
SEAT BELT WARNING SYSTEM - PROBLEM SYMPTOMS
| Symptom | Suspected area | See |
|---|---|---|
| Seat belt warning light for driver seat does not operate | Center airbag sensor assembly | 3 |
| Combination meter assembly | 3 | |
| Front seat inner belt assembly LH | 1 | |
| Instrument cluster finish panel sub-assembly | 3 | |
| Wire harness | 3 | |
| Seat belt warning light for passenger seat does not operate | Front seat inner belt assembly RH | FRONT SEAT INNER BELT ASSEMBLY |
| Separate type front seat cushion pad (occupant detection sensor) | FRONT SEAT INNER BELT ASSEMBLY | |
| Combination meter assembly | 3 | |
| Center airbag sensor assembly | 3 | |
| Multi-display | 2 | |
| Wire harness | 2 | |
| Seat belt warning buzzer does not sound (Seat belt warning lights for driver and passenger seat operate normally) | Combination meter assembly | 3 |