Fail-Safe Chart
- FAIL-SAFE FUNCTION
When short circuit of the absorber control actuator is detected, the absorber control actuator located on the other side of the detected absorber will be set at step 9. The absorber control actuator remains at the step 9 position until the engine switch is turned off.
- FAIL-SAFE CHART FAIL-SAFE
DTC No. Malfunction Item Fail-safe operation Fail-safe Cancellation Condition Indication C1715
C1716
C1717Acceleration sensor circuit - Shudder control (H [infinity] control) is cancelled
- Other controls are continued, setting the lowest step of the front and rear absorber control actuators at 9
The system returns to normal - DTC: stored
- Indicator light: OFF
C1725
C1726
C1727
C1728Absorber control actuator circuit Control is cancelled (except malfunctioning area) after setting the step of the front and rear absorber control actuators at 9 The system returns to normal - DTC: stored
- Indicator light: OFF
C1761 Absorber control ECU Control is cancelled The system returns to normal - DTC: stored
- Indicator light: OFF
C1773 VGRS ECU Roll posture control is prohibited The system returns to normal - DTC: stored
- Indicator light: OFF
C1774 Power source circuit Control is cancelled The system returns to normal - DTC: not stored
- Indicator light: OFF
C1776 Wheel speed sensor circuit Control is cancelled after setting the step of the front and rear absorber control actuators at 9 The system returns to normal - DTC: stored
- Indicator light: OFF
C1777 Steering angle sensor circuit Roll posture control is prohibited The system returns to normal - DTC: stored
- Indicator light: OFF
U0100 CAN communication circuit Control is continued, setting engine rotation at 1000 rpm The system returns to normal - DTC: not stored
- Indicator light: OFF
U0101 CAN communication circuit Control is continued The system returns to normal - DTC: not stored
- Indicator light: OFF
U0122 CAN communication circuit Control is cancelled after setting the step of the front and rear absorber control actuators at 9 The system returns to normal - DTC: not stored
- Indicator light: OFF
U0126 CAN communication circuit Roll posture control is prohibited The system returns to normal - DTC: not stored
- Indicator light: OFF
U0130 CAN communication circuit Roll posture control is prohibited The system returns to normal - DTC: not stored
- Indicator light: OFF
U0132 CAN communication circuit Control is cancelled after setting the step of the front and rear absorber control actuators at 9 The system returns to normal - DTC: not stored
- Indicator light: OFF