Service Data
SERVICE DATA TABLE - STARTING & CHARGING
| Starter | Rated voltage and output power | 12 V 2.0 kW | |
| No-load characteristics | Current | 100 A or less at 11.5 V | |
| Brush length | Standard | 15.0 mm (0.591 in.) | |
| Minimum | 9.0 mm (0.354 in.) | ||
| Spring installed load | Standard | 21.5 to 27.5 N (2.2 to 2.8 kgf, 4.8 to 6.2 lbf) | |
| Minimum | 12.7 N (1.3 kgf, 2.9 lbf) | ||
| Commutator | |||
| Diameter | Standard | 35.0 mm (1.378 in.) | |
| Minimum | 34.0 mm (1.339 in.) | ||
| Undercut depth | Standard | 0.7 mm (0.028 in.) | |
| Minimum | 0.2 mm (0.008 in.) | ||
| Circle runout | Maximum | 0.05 mm (0.0020 in.) | |
| Field frame | |||
| Shunt coil resistance | at 20°C (68°F) | 1.5 to 1.9 Ω | |
| Battery | Maintenance-free | ||
| Voltage | at 20°C (68°F) | 12.5 to 12.9 V | |
| Generator | Rated output | 12V 130A | |
| Rotor coil resistance | at 20°C (68°F) | 2.3 to 2.7 Ω | |
| Slip ring diameter | Standard | 14.2 to 14.4 mm (0.559 to 0.567 in.) | |
| Minimum | 14.0 mm (0.551 in.) | ||
| Brush exposed length | Standard | 10.5 mm (0.413 in.) | |
| Minimum | 4.5 mm (0.177 in.) | ||
| Voltage regulator | Regulating voltage | 13.2 to 14.8 V | |