LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> GX 470 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection, Installation >> Camshaft Position Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Installation

  1. INSTALL CAMSHAFT POSITION SENSOR 
    Fig 1: Identifying Camshaft Position Sensor Bolt & Stud Bolt
    G04968214Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
    1. Install the camshaft position sensor with the bolt and stud bolt.

      Torque: 7.5 N*m (80 kgf*cm, 66 in.*lbf) 

    2. Reconnect the camshaft position sensor connector.
  2. INSTALL TIMING BELT COVER SUB-ASSEMBLY NO. 3 LH (See  INSTALLATION  ) 
  3. INSTALL OIL COOLER PIPE (See  INSTALLATION  ) 
  4. INSTALL FAN AND GENERATOR V BELT (See  INSTALLATION  ) 
  5. ADD ENGINE COOLANT (See  REPLACEMENT  ) 
  6. CHECK FOR ENGINE COOLANT LEAKS (See  ON-VEHICLE INSPECTION  ) 
  7. INSTALL V-BANK COVER SUB-ASSEMBLY (See  INSTALLATION  ) 
scientia non olet · About LEMON Manuals