LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> GX 470 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection, Installation >> Camshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Removal

  1. DRAIN ENGINE COOLANT (See  REPLACEMENT  ) 
  2. REMOVE V-BANK COVER SUB-ASSEMBLY (See  REMOVAL  ) 
  3. REMOVE FAN AND GENERATOR V BELT (See  REMOVAL  ) 
  4. REMOVE OIL COOLER PIPE (See  REMOVAL  ) 
  5. REMOVE TIMING BELT COVER SUB-ASSEMBLY NO. 3 LH (See  REMOVAL  ) 
  6. REMOVE CAMSHAFT POSITION SENSOR 
    1. Disconnect the camshaft position sensor connector.
      2. Fig 1: Identifying Stud Bolt & Camshaft Position Sensor
      G04968214Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
    2. Remove the bolt, stud bolt and camshaft position sensor.
scientia non olet · About LEMON Manuals