LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> GX 470 >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Brake Control) >> Steering Angle Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor: Removal

WARNING: This page is about a different car, the 2007 Lexus GX 470. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECAUTION 
  2. DISCONNECT BATTERY NEGATIVE TERMINAL 
  3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  4. REMOVE STEERING WHEEL COVER LOWER NO. 3 
  5. REMOVE STEERING WHEEL COVER LOWER NO. 2 
  6. REMOVE STEERING PAD (See  REMOVAL  ) 
  7. REMOVE STEERING WHEEL ASSEMBLY (See  REMOVAL  ) 
  8. REMOVE STEERING COLUMN COVER (See  REMOVAL  ) 
  9. REMOVE SPIRAL CABLE (See  REMOVAL  ) 
  10. REMOVE TURN SIGNAL SWITCH ASSEMBLY (See  REMOVAL  ) 
  11. REMOVE STEERING ANGLE SENSOR 
    1. Remove the steering sensor connector.
      Fig 1: Identifying Steering Sensor Connector
      G04965580Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 claws, then remove the steering sensor.
      Fig 2: Identifying Steering Sensor Connector Claws
      G04965581Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals