Torque Specification
Torque Specifications Table - Engine Mechanical (1 Of 2)
| Part Tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| Oil pan sub-assy No.2 x Drain plug | 39 | 398 | 29 | |
| Cylinder head cover sub-assy LH x Ventilation valve sub-assy | 27 | 275 | 20 | |
| Oil pump assy x Oil cooler assy | Bolt | 18 | 183 | 13 |
| Nut | 18 | 183 | 13 | |
| Water by-pass joint FR x Cylinder head | 18 | 185 | 13 | |
| Water by-pass pipe x Cylinder block | 18 | 185 | 13 | |
| Starter assy x Cylinder block | 39 | 400 | 29 | |
| Starter assy x Engine wire No. 2 | 9.8 | 100 | 7.2 | |
| Water by-pass joint RR x Cylinder head | 18 | 185 | 13 | |
| Knock sensor x Cylinder block | 45 | 450 | 33 | |
| Crankshaft position sensor x Oil pump assy | 6.5 | 65 | 58 in.lbf | |
| Camshaft position sensor x Cylinder head | 7.5 | 80 | 66 in.lbf | |
| Ignition coil assy x Cylinder head cover | 7.5 | 80 | 66 in.lbf | |
| Fan bracket sub-assy x Cylinder block | 12 mm head | 16 | 160 | 12 |
| 14 mm head | 32 | 326 | 24 | |
| V-ribbed belt tensioner assy x Cylinder block | Bolt | 16 | 160 | 12 |
| Nut | 16 | 160 | 12 | |
| Timing belt cover sub-assy No.2 x Cylinder block | 16 | 160 | 12 | |
| Timing chain or belt cover No.2 x Cylinder block | Bolt | 7.5 | 80 | 66 in.lbf |
| Nut | 7.5 | 80 | 66 in.lbf | |
| Timing belt cover sub-assy No.3 LH x Cylinder block | 7.5 | 80 | 66 in.lbf | |
| Pump bracket x Cylinder block | 43 | 438 | 32 | |
| Oil cooler pipe x Cylinder block | Bolt | 7.5 | 80 | 66 in.lbf |
| Nut | 7.5 | 80 | 66 in.lbf | |
| Harness bracket x Cylinder block | 8.0 | 80 | 71 in.lbf | |
| Engine mounting bracket x Cylinder block | 36 | 367 | 27 | |
| Wire harness heat insulator No.2 x Cylinder block | 17 | 175 | 13 | |
| Intake manifold assy x Cylinder head | 18 | 185 | 13 | |
| Engine mounting bracket x Frame brackets | 38 | 387 | 28 | |
| Exhaust manifold x Cylinder head | 44 | 450 | 33 | |
| Exhaust manifold heat insulator x Exhaust manifold | 7.5 | 80 | 69 in.lbf | |
| Oil level gauge guide x Cylinder head | 15 | 155 | 11 | |
| Transmission oil filler tube x Cylinder head | 12 | 122 | 9 | |
| Fan w/ fluid coupling x Fan bracket sub-assy | 29 | 296 | 21 | |
| Compressor x Cylinder block | Bolt | 47 | 475 | 34 |
| Nut | 25 | 255 | 18 | |
| Vane pump assy x Cylinder block | Bolt | 43 | 438 | 32 |
| Nut | 43 | 438 | 32 | |
| Fan shroud x Radiator assy | 5.0 | 51 | 44 in.lbf | |
| Air cleaner assy x Body | 12 | 122 | 9 | |
| V-bank cover sub-assy x Intake manifold assy | 7.5 | 80 | 66 in.lbf | |
| Hood x Body | 13 | 133 | 10 | |
| Engine rear oil seal retainer x Cylinder block | 8.0 | 82 | 71 in.lbf | |
| Oil pump assy x Cylinder block | Bolt A, B, C and E | 16 | 158 | 11 |
| Bolt D | 31 | 311 | 23 | |
| Oil strainer sub-assy x Cylinder block | 7.5 | 76 | 66 in.lbf | |
| Oil pan sub-assy x Cylinder block | Bolt A and D | 7.5 | 76 | 66 in.lbf |
| Bolt B, C and nut | 28 | 286 | 21 | |
| Oil pan baffle plate x Oil pan sub-assy | 7.5 | 76 | 66 in.lbf | |
| Oil pan sub-assy No.2 x Oil pan sub-assy | 7.5 | 76 | 66 in.lbf | |
Torque Specifications Table - Engine Mechanical (2 Of 2)
| Part Tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| Water pump assy x Cylinder block | Bolt | 21 | 214 | 15 |
| Stud bolt and nut | 18 | 184 | 13 | |
| Cylinder head x Cylinder block | 1st | 40 | 408 | 30 |
| 2nd | Turn 90 | Turn 90 | Turn 90 | |
| 3rd | Turn 90 | Turn 90 | Turn 90 | |
| Bearing cap x Cylinder head | Bolt C | 7.5 | 76 | 66 in.lbf |
| Other | 16 | 163 | 12 | |
| Timing belt plate RR x Cylinder head | 7.5 | 76 | 66 in.lbf | |
| Timing belt idler sub-assy No.2 x Cylinder block | 35 | 352 | 25 | |
| Timing belt idler sub-assy No.1 x Cylinder block | 35 | 352 | 25 | |
| Camshaft timing pulley x Camshaft | 108 | 1101 | 80 | |
| Chain tensioner assy x Oil pump assy | 26 | 270 | 19 | |
| Timing belt No.1 over x Cylinder block | 7.5 | 76 | 66 in.lbf | |
| Crankshaft damper x Crankshaft | 245 | 2498 | 181 | |
| Idler pulley sub-assy No.2 | 39 | 398 | 29 | |
| Oil filler cap housing x Cylinder head cover | 7.5 | 76 | 66 in.lbf | |
| Spark plug x Cylinder head | 17.5 | 178 | 13 | |
| Connecting rod cap x Connecting rod | 1st | 25 | 250 | 18 |
| 2nd | Turn 90 | Turn 90 | Turn 90 | |
| Main bearing cap x Cylinder block | 1st | 27 | 275 | 20 |
| 2nd | Turn 90 | Turn 90 | Turn 90 | |
| Cylinder head cover x Cylinder head | 6.0 | 60 | 53 in.lbf | |
| Drive plate & ring gear x Crankshaft | 1st | 49 | 500 | 36 |
| 2nd | Turn 90 | Turn 90 | Turn 90 | |
| Camshaft drive gear x Camshaft timing tube assy | 7.5 | 76 | 66 in.lbf | |
| Camshaft timing tube assy x Camshaft | 78 | 795 | 58 | |
| Screw plug x Camshaft timing tube assy | 15 | 152 | 11 | |
| Timing belt plate RR x Cylinder head | 7.5 | 76 | 66 in.lbf | |