Torque Specification
Torque Specifications Table - Starting & Charging
| Part Tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| End cover x Brush holder | 3.8 | 39 | 34 in.lbf | |
| Starter hosing x Magnetic switch | 9.3 | 95 | 82 in.lbf | |
| End cover with field frame x Magnetic switch | 9.3 | 95 | 82 in.lbf | |
| Lead wire of field coil x Terminal C | 5.9 | 60 | 52 in.lbf | |
| Wire clamp, Starter wire x Starter | 9.8 | 100 | 86 in.lbf | |
| Starter x Cylinder block | 39 | 400 | 29 | |
| Water by-pass joint RR x Cylinder head | 18 | 185 | 13 | |
| Water by-pass pipe x Water pump | 18 | 185 | 13 | |
| Intake manifold x Cylinder head | Bolt | 18 | 185 | 13 |
| Nut | 18 | 185 | 13 | |
| Bearing retainer x Drive end frame | 2.6 | 2.7 | 23 in.lbf | |
| Rectifier end frame x Drive end frame | 5.8 | 59 | 51 in.lbf | |
| Generator pulley x Rotor | 111 | 1,125 | 81 | |
| Brush holder x Rectifier holder, Voltage regulator | 1.8 | 18 | 16 in.lbf | |
| Rear end cover x Rectifier holder | 4.6 | 47 | 41 in.lbf | |
| Generator x Cylinder block | Bolt | 39 | 400 | 29 |
| Nut (M10) | 39 | 400 | 29 | |
| Nut (M8) | 16 | 158 | 11 | |
| Generator wire x Generator | 9.8 | 100 | 86 | |
| Fan shroud x Radiator | 5.0 | 51 | 44 in.lbf | |
| Fluid coupling x Engine | 29 | 296 | 21 | |