Height Control Dryer ASSY: Replacement

HINT:

See COMPONENTS 

1. REMOVE REAR DISC WHEEL 
2. REMOVE QUARTER PANEL MUDGUARD REAR LH 
3. REMOVE FUEL TANK FILLER PIPE PROTECTOR (See  HEIGHT CONTROL COMPRESSOR ASSY   ) 
4. REMOVE HEIGHT CONTROL COMPRESSOR COVER (See  HEIGHT CONTROL COMPRESSOR ASSY   ) 
5. REMOVE HEIGHT CONTROL FILTER (See  HEIGHT CONTROL COMPRESSOR ASSY   ) 
6. DISCONNECT HEIGHT CONTROL TUBE NO. 2 (See  HEIGHT CONTROL COMPRESSOR ASSY   ) 
7. REMOVE HEIGHT CONTROL DRYER ASSY 
   1. Disconnect the connector.
   2. Remove the 3 bolts.
      Fig 1: Removing Height Control Dryer Assy Bolts

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Remove the 3 bolts, the height control compressor and the dryer with the bracket.
      Fig 2: Removing Height Control Compressor

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   4. Remove the bolt and the dryer.
   5. Remove the O-ring.
8. INSTALL HEIGHT CONTROL DRYER ASSY 
   1. Install the bolt, the dryer and a new O-ring.

      Torque: 6.4 N.m (65 kgf.cm, 57 in.lbf) 

   2. Assemble the height control compressor, the dryer and the bracket as a unit to the vehicle, and tighten the 3 bolts to fix the bracket to the frame.

      Torque: 29 N.m (300 kgf.cm, 21 ft.lbf) 

   3. Install the height control compressor assy to the bracket with the 3 bolts.

      Torque: 5.9 N.m (60 kgf.cm, 52 in.lbf) 

   4. Connect the connector.
9. CONNECT HEIGHT CONTROL TUBE NO. 2 (See  HEIGHT CONTROL COMPRESSOR ASSY   ) 
10. INSTALL HEIGHT CONTROL FILTER (See  HEIGHT CONTROL COMPRESSOR ASSY   ) 
11. INSTALL HEIGHT CONTROL COMPRESSOR COVER (See  HEIGHT CONTROL COMPRESSOR ASSY   ) 
12. INSPECT AIR LEAK (See  ON-VEHICLE INSPECTION   ) 
13. INSTALL FUEL TANK FILLER PIPE PROTECTOR (See  HEIGHT CONTROL COMPRESSOR ASSY   ) 
14. INSTALL QUARTER PANEL MUDGUARD REAR LH 
15. INSTALL REAR DISC WHEEL 

    Torque: 112 N.m (1,140 kgf.cm, 83 ft.lbf)