Skid Control Buzzer: Installation
- INSTALL SKID CONTROL BUZZER ASSEMBLY
- Attach the claw and install the skid control buzzer assembly.
- Connect the skid control buzzer assembly connector.
- INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (See INSTALLATION )
- INSTALL LOWER INSTRUMENT FINISH PANEL SUBASSEMBLY (See INSTALLATION )
- INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See INSTALLATION )
- INSTALL SIDE INSTRUMENT PANEL LH (See INSTALLATION )
- CONNECT BATTERY NEGATIVE TERMINAL (See INSTALLATION )
- INSPECT SRS WARNING LIGHT
HINT:
(See DIAGNOSIS SYSTEM ).
- PERFORM INITIALIZATION
HINT:
(See INITIALIZATION ).
Some system need initialization after reconnecting the cable to the negative battery cable.