Rear Speed Sensor: Installation

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL REAR SPEED SENSOR
1. Install the rear speed sensor with the bolt.
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
  
  NOTE: Prevent foreign matter from attaching to the sensor tip.
2. Connect the speed sensor connector.
  
  Fig 1: Identifying Bolt Of Speed Sensor Rear LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR WHEEL
1. Install the rear wheel.
  Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
INSPECT SPEED SENSOR SIGNAL
(See TEST MODE PROCEDURE )