LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Brake Control) >> Skid Control Buzzer >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Skid Control Buzzer: Removal

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECAUTION 
    CAUTION: Be sure to read the "PRECAUTION" thoroughly before servicing (See AIRBAG SYSTEM ).
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
  3. REMOVE SIDE INSTRUMENT PANEL LH (See  REMOVAL  ) 
  4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See  REMOVAL  ) 
  5. REMOVE LOWER INSTRUMENT FINISH PANEL SUBASSEMBLY (See  REMOVAL  ) 
  6. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY (See  REMOVAL  ) 
  7. REMOVE SKID CONTROL BUZZER ASSEMBLY 
    1. Remove the clip and skid control buzzer assembly.
      Fig 1: Identifying Clip And Skid Control Buzzer Assembly
      G04052222Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals