DTC P0111 Intake Air Temperature Sensor Gradient Too High: Wiring Diagram

Refer to DTC P0110  .

1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0111) 
   1. Connect the intelligent tester to the DLC3.
   2. Turn the engine switch on (IG).
   3. Turn the tester on.
   4. Enter the following menus: DIAGNOSIS / ENHANCED OBD II / DTC INFO / CURRENT CODES.
   5. Read DTCs.

      Result 

      RESULT REFERENCE
      
      

      Display (DTC Output)	Proceed to
      P0111 and other DTCs	A
      P0111	B

      HINT:

      If any DTCs other than P0111 are output, troubleshoot those DTCs first.

   B : REPLACE MASS AIR FLOW METER 

   A : GO TO  DTC CHART