LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Transfer) >> Transfer Control Solenoid >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transfer Control Solenoid: Removal

WARNING: This page is about a different car, the 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN AUTOMATIC TRANSMISSION FLUID (See  AUTOMATIC TRANSMISSION (A760H) or AUTOMATIC TRANSMISSION (A960E)  ) 
  2. REMOVE REAR NO. 1 FLOOR PANEL BRACE (See  REMOVAL  ) 
  3. REMOVE FRONT CENTER FLOOR BRACE (See Step 2 in  REMOVAL  ) 
  4. DISCONNECT HEATED OXYGEN SENSOR (See Step 3 or 4 in  REMOVAL  ) 
  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY (See Step 5 in  REMOVAL  ) 
  6. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR (See Step 2 in  REMOVAL  ) 
  7. SUPPORT AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY (See  AUTOMATIC TRANSMISSION (A760H) or AUTOMATIC TRANSMISSION (A960E)  ) 
  8. REMOVE ENGINE REAR MOUNTING MEMBER (See Step 8 in  REMOVAL   ) 
  9. REMOVE TRANSFER DYNAMIC DAMPER (See Step 9 in  REMOVAL   ) 
  10. REMOVE TRANSFER OIL PAN (See Step 10 in  REMOVAL   ) 
  11. REMOVE TRANSFER VALVE BODY ASSEMBLY (See Step 11 in  REMOVAL   ) 
  12. REMOVE TRANSFER CONTROL SOLENOID 
  1. Remove the bolt, solenoid lock plate and transfer control solenoid.
Fig 1: Identifying Bolt For Removing Transfer Control Solenoid
G04046854Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals