LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Transfer) >> Transfer Wire >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transfer Wire: Removal

WARNING: This page is about a different car, the 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN AUTOMATIC TRANSMISSION FLUID (See  AUTOMATIC TRANSMISSION (A760H) or AUTOMATIC TRANSMISSION (A960E)  ) 
  2. REMOVE REAR NO. 1 FLOOR PANEL BRACE (See  REMOVAL  ) 
  3. REMOVE FRONT CENTER FLOOR BRACE (See  REMOVAL  ) 
  4. DISCONNECT HEATED OXYGEN SENSOR (See Step 3 or 4 in  REMOVAL  ) 
  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY (See Step 5 in  REMOVAL  ) 
  6. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR (See  REMOVAL  ) 
  7. SUPPORT AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY (See  AUTOMATIC TRANSMISSION (A760H) or AUTOMATIC TRANSMISSION (A960E)  ) 
  8. REMOVE ENGINE REAR MOUNTING MEMBER 
    1. Remove the 4 bolts, 3 nuts and engine rear mounting member.
    Fig 1: Locating Engine Rear Mounting Member Bolt & Nuts
    G04046859Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE TRANSFER DYNAMIC DAMPER 
    1. Remove the 2 bolts and the transfer dynamic damper.
    Fig 2: Identifying Transfer Dynamic Damper Removing Bolts
    G04046860Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE TRANSFER OIL PAN 
    1. Remove the 9 bolts.
      Fig 3: Identifying Transfer Oil Pan Bolts
      G04046861Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Insert the blade of SST between the transfer oil pan and transfer case. Cut through the sealer and remove the transfer oil pan.

      SST 09032-00100 

      NOTE: Do not damage the contact surface of the transfer oil pan.
      Fig 4: Inserting Blade Of SST Between Transfer Oil Pan & Transfer Case
      G04046862Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the transfer oil cleaner magnet from the transfer oil pan.
    NOTE:
    • Clean the inside of the oil pan thoroughly, removing all metal shavings, sludge and any other foreign objects.
    • Remove any metal shavings from the magnet.
    Fig 5: Removing Metal Shavings From Magnet
    G04046863Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE TRANSFER WIRE 
  1. Remove the 4 bolts and the transfer upper valve body.
  2. Disconnect the 2 transfer wire connectors.
  3. Remove the bolt and the transfer wire.
Fig 6: Removing Transfer Wire
G04046864Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals