Torque Specifications
WARNING: This page is about a different car, the 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
4GR-FSE STARTING TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft*lbf | |
|---|---|---|---|---|
| Starter x Engine | Bolt | 58 | 591 | 43 |
| Terminal 30 | 9.8 | 100 | 87 in.*lbf | |
| Terminal C | 10 | 102 | 7 | |
| Exhaust manifold subassembly x Cylinder block | Nut | 21 | 214 | 15 |
| Engine room R/B No.3 x Body | Bolt, Nut | 12.5 | 127 | 9 |
| Engine wire bracket x Cylinder head | Bolt | 10 | 102 | 7 |
| Ground cable x Cylinder head | Bolt | 10 | 102 | 7 |
| Ground cable x Body | Bolt | 13 | 133 | 10 |
| Starter commutator end frame x Starter yoke assembly | Bolt | 6.0 | 61 | 53 in.*lbf |
| Magnetic switch x Starter drive housing | Screw | 7.5 | 76 | 66 in.*lbf |