Rear Speed Sensor: Removal

WARNING: This page is about a different car, the 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.

REMOVE REAR WHEEL
REMOVE REAR SPEED SENSOR
1. Disconnect the rear speed sensor connector.
2. Remove the bolt and rear speed sensor.
NOTE: Prevent foreign matter from attaching to the sensor tip.

Fig 1: Identifying Bolt Rear Speed Sensor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002