Data List/Active Test

1. DATA LIST 

   HINT:

   Using the hand-held tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

   1. Connect the hand-held tester (with CAN VIM) to the DLC3.
   2. Turn the ignition switch ON.
   3. Read the DATA LIST.

   DRIVER DOOR ECU: 

   DRIVER DOOR ECU DATA LIST REFERENCE
   
   

   Item	Measurement Item/Display (Range)	Normal Condition
   MIR POS SEN V	Vertical mirror position/MIN:0, MAX: 5 V	Within range from 0 to 5 V
   MIR POS SEN H	Horizontal mirror position/MIN: 0, MAX: 5 V	Within range from 0 to 5 V

   FRONT PASSENGER DOOR ECU: 

   FRONT PASSENGER DOOR ECU DATA LIST REFERENCE
   
   

   Item	Measurement Item/Display (Range)	Normal Condition
   MIR POS SEN V	Vertical mirror position/MIN: 0, MAX: 5 V	Within range from 0 to 5 V
   MIR POS SEN H	Horizontal mirror position/MIN: 0, MAX: 5 V	Within range from 0 to 5 V

   DRIVER SIDE J/B ECU: 

   DRIVER SIDE J/B ECU DATA LIST REFERENCE
   
   

   Item	Measurement Item/Display (Range)	Normal Condition
   MIRR SEL SW R	Mirror selection switch signal for RH mirror/ON or OFF	ON: Switch is in right position OFF: Switch is in original or left position
   MIRR SEL SW L	Mirror selection switch signal for LH mirror/ON or OFF	ON: Switch is in left position OFF: Switch is in original or right position
   MIRR POS SW R	Mirror position switch signal (Right)/ON or OFF	ON: Switch R is ON OFF: Any switch except R is ON or all switches are OFF
   MIRR POS SW L	Mirror position switch signal (Left)/ON or OFF	ON: Switch L is ON OFF: Any switch except L is ON or all switches are OFF
   MIRR POS SW UP	Mirror position switch signal (Up)/ON or OFF	ON: Switch UP is ON OFF: Any switch except UP is ON or all switches are OFF
   MIRR POS SW DWN	Mirror position switch signal (Down)/ON or OFF	ON: Switch DOWN is ON OFF: Any switch except DOWN is ON or all switches are OFF
   MIRR FOLD SW	Mirror retract switch signal ON or OFF	ON: Switch is ON OFF: Switch is OFF
   MIRR RETRN SW	Mirror return switch signal ON or OFF	ON: Switch is ON OFF: Switch is OFF

   DRIVER SEAT ECU: 

   DRIVER SEAT ECU DATA LIST REFERENCE
   
   

   Item	Measurement Item/Display (Range)	Normal Condition
   POWER VOLTAGE	Power supply for position control ECU & switch/MIN: 0, MAX 19.89 V	Within range from 10 to 14 V
   IG SW	Ignition switch status/ON or OFF	ON: Ignition switch is ON OFF: Ignition switch is OFF
   KEY UNLOCK SW	Key unlock warning switch signal/ON or OFF	ON: Key is in ignition key cylinder OFF: Key is not in ignition key cylinder
   D-DOOR WARN SW	Door courtesy switch signal/ON or OFF	ON: Driver side door is open OFF: Driver side door is closed
   PNP SW	Shift lever position P signal/ON or OFF	ON: Shift lever in P position OFF: Shift lever in any position except P
   N SW	Shift lever position N signal/ON or OFF	ON: Shift lever in N position OFF: Shift lever in any position except N
   PUSH SW	Push switch signal/ON or OFF	ON: Push switch is ON OFF: Push switch is OFF
   M1 SW	Seat memory switch M1 signal/ON or OFF	ON: Seat memory switch M1 is ON OFF: Seat memory switch M1 is OFF
   M2 SW	Seat memory switch M2 signal/ON or OFF	ON: Seat memory switch M2 is ON OFF: Seat memory switch M2 is OFF
   M3 SW	Seat memory switch M3 signal/ON or OFF	ON: Seat memory switch M3 is ON OFF: Seat memory switch M3 is OFF
   SET SW	Seat memory set switch signal/ON or OFF	ON: Memory set switch is ON OFF: Memory set switch is OFF
   MEM M1 SW	Driving position memorized in seat memory switch M1/NOT MEM or MEM	MEM: Memorized NOT MEM: Not memorized
   MEM M2 SW	Driving position memorized in seat memory switch M2/NOT MEM or MEM	MEM: Memorized NOT MEM: Not memorized
   MEM M3 SW	Driving position memorized in seat memory switch M3/NOT MEM or MEM	MEM: Memorized NOT MEM: Not memorized
   D-MIRR MEM M1	Driver side mirror position memorized in seat memory switch M1/MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   D-MIRR MEM M2	Driver side mirror position memorized in seat memory switch M2/MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   D-MIRR MEM M3	Driver side mirror position memorized in seat memory switch M3/MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   P-MIRR MEM M1	Passenger side mirror position memorized in seat memory switch M1/MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   P-MIRR MEM M2	Passenger side mirror position memorized in seat memory switch M2/MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   P-MIRR MEM M3	Passenger side mirror position memorized in seat memory switch M3/MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized
   D-MIR MEM POS 1	Driver side mirror position memorized in seat memory switch M1/MIN: 0, MAX: 65535	Within range from 0 to 65535
   P-MIR MEM POS 1	Passenger side mirror position memorized in seat memory switch M1/MIN: 0, MAX: 65535	Within range from 0 to 65535

   DRIVER SEAT ECU DATA LIST REFERENCE
   
   

   Item	Measurement Item/Display (Range)	Normal Condition
   D-MIR MEM POS 2	Driver side mirror position memorized in seat memory switch M2/MIN: 0, MAX: 65535	Within range from 0 to 65535
   P-MIR MEM POS 2	Passenger side mirror position memorized in seat memory switch M2/MIN: 0, MAX: 65535	Within range from 0 to 65535
   D-MIR MEM POS 3	Driver side mirror position memorized in seat memory switch M3/MIN: 0, MAX: 65535	Within range from 0 to 65535
   P-MIR MEM POS 3	Passenger side mirror position memorized in seat memory switch M3/MIN: 0, MAX: 65535	Within range from 0 to 65535

2. ACTIVE TEST 

HINT:

Performing the hand-held tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in the troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

1. Connect the hand-held tester (with CAN VIM) to the DLC3.
2. Turn the ignition switch ON.
3. Perform the ACTIVE TEST by following the directions on the tester screen.

DRIVER DOOR ECU: 

FRONT PASSENGER DOOR ECU: