Torque Specification

TORQUE SPECIFICATION

Part tightened	N.m	kgf.cm	ft.lbf
Starter
Starter wire clamp at Wire bracket	9.8	100	87 in..lbf
Starter wire at Starter assy	9.8	100	87 in..lbf
End cover at Brush holder	3.8	39	34 in..lbf
Starter housing at Magnetic switch	9.3	95	82 in..lbf
End cover with starter yoke at Starter housing	9.3	95	82 in..lbf
Lead wire of starter yoke at Terminal C	5.9	60	52 in..lbf
Starter assy at Cylinder block	39	400	29
Water bypass pipe at Cylinder block	18	185	13
V-bank cover at V-bank cover bracket	5.0	51	44 in..lbf
Generator
Generator at Cylinder block	39	400	29
Generator at Grand cable	12	122	8.9
Bearing retainer at Drive end frame	2.3	24	20 in..lbf
Generator pulley at Rotor	111	1, 132	82
Generator at Cord clip	5.9	60	52 in..lbf
Coil assy at Drive end frame	5.8	59	51 in..lbf
Brush holder assy at Coil assy	1.8	18	16 in..lbf
Rear end cover at Coil assy	4.6	47	41 in..lbf
V-bank cover at V-bank cover bracket	5.0	51	44 in..lbf