On-Vehicle Inspection
- INSPECT INTAKE AIR CONTROL FUNCTION
- Remove the V-bank cover.
- Connect the hand-held tester (with CAN VIM) to the DLC3.
- Perform the ACTIVE TEST, and then check that the actuator rod operates.
- Start the engine.
- Check that the VSV for IAC valve in ON (seal) under these conditions.
- Depressing the accelerator pedal to a throttle valve opening angle of 60 degrees.
- Racing the engine above 4,700 rpm.
- Check that the VSV for IAC valve is OFF (vent) under these conditions.
- The engine is idling.
- Releasing the accelerator pedal while under the 2 conditions in step (e).
If the result is not as specified, inspect the IAC valve, vacuum tank and VSV for normal operation. Replace malfunctioning parts as necessary.