Torque Specification
TORQUE SPECIFICATION
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Air cleaner assy at Body | 5.0 | 51 | 44 in..lbf |
| ECM cover at ECM box | 5.0 | 51 | 44 in..lbf |
| Vane pump assy at Cylinder head Bolt | 39.2 | 400 | 29 |
| Vane pump assy at Cylinder head Nut | 43.1 | 440 | 32 |
| Engine mounting bracket front LH at Cylinder block | 36 | 367 | 27 |
| Engine mounting bracket front No. 1 RH at Cylinder block | 36 | 367 | 27 |
| Exhaust manifold sub-assy LH at Cylinder head | 44 | 449 | 32 |
| Exhaust manifold sub-assy RH at Cylinder head | 44 | 449 | 32 |
| Oil filter bracket sub-assy at Cylinder block | 18 | 184 | 13 |
| Ignition coil assy at Cylinder head cover | 7.5 | 77 | 66 in..lbf |
| Engine hanger No. 1 at Cylinder head | 37 | 377 | 27 |
| Engine hanger No. 2 at Cylinder head | 37 | 377 | 27 |
| Oil level gauge guide at Cylinder head | 7.5 | 77 | 66 in..lbf |
| Water bypass pipe joint RR at Cylinder head | 18 | 184 | 13 |
| Water bypass pipe joint FR at Cylinder block | 18 | 184 | 13 |
| Water inlet housing at Water pump assy | 18 | 184 | 13 |
| Intake manifold assy at Cylinder head | 18 | 184 | 13 |
| V-bank cover fastener at Surge tank | 7.5 | 77 | 66 in..lbf |
| V-bank cover bracket No. 1 at Surge tank | 7.5 | 77 | 66 in..lbf |
| V-bank cover bracket No. 2 at Surge tank | 7.5 | 77 | 66 in..lbf |
| V-bank cover bracket No. 3 at Surge tank | 7.5 | 77 | 66 in..lbf |
| Drive plate & ring gear sub-assy at Crankshaft 1st | 49 | 500 | 36 |
| Drive plate & ring gear sub-assy at Crankshaft 2nd | Turn 90° | Turn 90° | Turn 90° |
| Automatic transmission assy at Cylinder block | 72 | 734 | 53 |
| Automatic transmission assy at Oil pan sub-assy | 37 | 377 | 27 |
| Front suspension crossmember at Engine mounting insulator | 68 | 693 | 50 |
| Steering sliding w/shaft yoke sub-assy at Steering intermediate shaft | 35 | 357 | 26 |
| Cooler compressor assy at Idler pulley assy | 49 | 500 | 36 |
| Cooler compressor stay at Oil filter bracket | 29 | 296 | 21 |
| Camshaft drive gear at Camshaft timing tube assy | 7.5 | 77 | 66 in..lbf |
| Camshaft timing tube assy at Camshaft | 78 | 795 | 58 |
| Screw plug at Camshaft timing tube assy | 15 | 153 | 11 |
| Engine rear oil seal retainer at Cylinder block | 8.0 | 82 | 71 in..lbf |
| Water pump assy at Cylinder block for bolt | 21 | 214 | 16 |
| Water pump assy at Cylinder block for stud bolt and nut | 18 | 184 | 13 |
| Cylinder head LH at Cylinder block 1st | 59 | 602 | 44 |
| Cylinder head LH at Cylinder block 2nd | Turn 90° | Turn 90° | Turn 90° |
| Cylinder head RH at Cylinder block 1st | 59 | 602 | 44 |
| Cylinder head RH at Cylinder block 2nd | Turn 90° | Turn 90° | Turn 90° |
| Camshaft bearing cap at Cylinder head | |||
| Camshaft bearing cap at Cylinder head Front bearing cap (w/o seal washer) | 7.5 | 77 | 66 in..lbf |
| Camshaft bearing cap at Cylinder head Others | 16 | 163 | 12 |
| Timing belt plate RR RH at Cylinder head | 7.5 | 77 | 66 in..lbf |
| Timing belt plate RR RH No. 2 at Cylinder head | 7.5 | 77 | 66 in..lbf |
| Timing belt plate RR LH at Cylinder head | 7.5 | 77 | 66 in..lbf |
| Timing belt plate RR LH No. 2 at Cylinder head | 7.5 | 77 | 66 in..lbf |
| Camshaft timing pulley at Camshaft timing tube assy | 7.5 | 77 | 66 |
| Camshaft timing pulley LH at Camshaft timing tube assy | 7.5 | 77 | 66 |
| Timing belt idler sub-assy No. 1 at Oil pump | 34.5 | 352 | 25 |
| Timing belt idler sub-assy No. 2 at Oil pump | 34.5 | 352 | 25 |
| Timing belt tensioner at Oil pump | 26 | 265 | 19 |
| Crankshaft damper sub-assy at Crankshaft | 245 | 2,500 | 181 |
| V ribbed belt tensioner assy at Cylinder block | 16 | 163 | 12 |
| Timing belt cover sub-assy No. 2 at Cylinder block | 16 | 163 | 12 |
| Idler pulley sub-assy No. 2 at Idler pulley assy | 39 | 398 | 29 |
| Idler pulley assy at Cylinder block 12 mm head | 16 | 163 | 12 |
| Idler pulley assy at Cylinder block 14 mm head | 32 | 330 | 24 |
| Timing belt cover sub-assy No. 3 LH at Cylinder block | 7.5 | 77 | 66 |
| Timing chain or belt cover No. 2 at Cylinder head | 7.5 | 77 | 66 |
| Cylinder head cover sub-assy LH at Cylinder head | 6.0 | 61 | 53 in..lbf |
| Cylinder head cover sub-assy at Cylinder head | 6.0 | 61 | 53 in..lbf |
| Timing belt No. 1 cover at Cylinder block | 7.5 | 77 | 66 in..lbf |
| Crankshaft bearing cap at Cylinder block 2 progressive type 1st | 27 | 275 | 20 |
| Crankshaft bearing cap at Cylinder block 2nd | Turn 90° | Turn 90° | Turn 90° |
| Crankshaft bearing cap at Cylinder block Others | 49 | 500 | 36 |
| Connecting rod cap at Connecting rod 1st | 24.5 | 250 | 18 |
| Connection rod cap at Connecting 2nd | Turn 90° | Turn 90° | Turn 90° |
| Water seal plate at Cylinder block | 14 | 145 | 10 |
| Cylinder block water drain cock sub-assy at Cylinder block | 49 | 500 | 36 |
| Drive plate & ring gear sub-assy at Torque converter clutch | 48 | 490 | 35 |
| Flywheel housing under cover at Transmission | 18 | 184 | 13 |
| Power steering gear housing assy at Front suspension crossmember | 65 | 663 | 48 |
| Pneumatic front LH w/shock absorber cylinder assy at Lower arm | 156.8 | 1,599 | 116 |
| Pneumatic front RH w/shock absorber cylinder assy at Lower arm | 156.8 | 1,599 | 116 |
| V-bank cover at Intake manifold | 5.0 | 51 | 44 in..lbf |
| Radiator upper support at Body | 13.5 | 135 | 10 |
| PS oil hose bracket at Generator | 5.0 | 51 | 44 in..lbf |
| Height control sensor link sub-assy front at Lower arm | 5.4 | 55 | 48 in..lbf |
| Stabilizer bar at Frame assy | 23 | 235 | 17 |
| Engine rear mounting insulator at Body for bolt | 25.5 | 260 | 19 |
| Engine rear mounting insulator at Body for nut | 13.5 | 138 | 10 |
| Propeller w/center bearing shaft assy at Body | 37 | 377 | 27 |
| Propeller w/center bearing shaft assy at Transmission assy | 79 | 806 | 58 |
| Propeller w/center bearing shaft assy at Differential | 79 | 806 | 58 |
| Heated oxygen sensor (Bank 1, 2 Sensor 2) at Exhaust pipe assy | 44 | 449 | 32 |
| w/ Catalyst converter assy at Exhaust manifold | 62 | 632 | 46 |
| Exhaust pipe assy at w/ Catalyst converter assy | 44 | 449 | 32 |
| Pipe support bracket at Body | 44 | 449 | 32 |
| Front floor brace center at Body | 13 | 133 | 10 |
| Throttle body assy at Intake manifold | 18 | 184 | 13 |
| Engine wire protector at Engine | 5.0 | 51 | 44 in..lbf |
| Engine oil level sensor at Oil pan sub-assy | 6.9 | 70 | 61 in..lbf |
| Camshaft timing oil control valve assy RH at Cylinder head | 7.5 | 77 | 60 in..lbf |
| Camshaft timing oil control valve assy LH at Cylinder head | 7.5 | 77 | 60 in..lbf |
| Knock sensor (Bank 1,2) at Cylinder block | 20 | 204 | 14 |
| Wire harness heat insulator No. 2 at Cylinder block | 7.5 | 77 | 60 in..lbf |
| Oil strainer at sub-assy at Cylinder block | 7.5 | 77 | 60 in..lbf |
| Oil pan baffle plate at Oil pan sub-assy | 7.5 | 77 | 66 in..lbf |
| Oil pan sub-assy No. 2 at Oil pan sub-assy | 7.5 | 77 | 66 in..lbf |
| Oil pump assy at Cylinder block 12 mm head | 15.5 | 160 | 11 |
| Oil pump assy at Cylinder block 14 mm head and 6 mm hexagon head | 30.5 | 310 | 22 |
| Oil pan sub-assy at Cylinder block 10 mm head | 7.5 | 80 | 66 in..lbf |
| Oil pan sub-assy at Cylinder block 12 mm head | 28 | 290 | 21 |