LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> LS 430 >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Lock System - Diagnostics >> Data List/Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List/Active Test

  1. DATA LIST 
    1. Connect the hand-held tester to the DLC3.
    2. Turn the ignition switch to the ON position and turn the hand-held tester on.
    3. Operate the hand-held tester according to the steps on the display and select "DATA LIST".
    DATA LIST

    Item Measurement Item/ Range (Display) Normal Condition Diagnostic Note
    PUSH SW PUSH SW/OFF or ON OFF: Push switch is turned OFF ON: Push switch is turned ON -
    KEY SW KEY SW/OFF or ON OFF: Key switch is turned OFF ON: Key switch is turned ON -
    IG SW IG SW/OFF or ON OFF: IG switch is turned OFF ON: IG switch is turned ON -
    LOCK POS SW Lock position sensor/OFF or ON OFF: Steering lock shaft is unlocked ON: Steering lock shaft is locked -
    UNLOCK POS SW Unlock position sensor/OFF or ON OFF: Steering lock shaft is locked ON: Steering lock shaft is unlocked -
    INTLOCK CBL POS Unlock sensor/LOCK or UNLOCK LOCK: Interlock cable position is locked UNLOCK: Interlock cable position is unlocked -
    STEERING LOCK Steering lock/SET or UNSET SET: Steering lock is activated UNSET: Steering lock is not activated -
    IMMOBILIZER IMMOBILIZER/SET or UNSET SET: Immobilizer is activated UNSET: Immobilizer is not activated -
    CHECK (SECURITY) CHECK (SECURITY)/ABNOML or NORMAL ABNORMAL: Interior verification is abnormal NORMAL: Interior verification is normal -
    SECURITY COM ID Security communication ID/NG or OK NG: Security ECU communication ID verification is abnormal OK: Security ECU communication ID verification is normal -
    SECURITY B-CODE Security B code/NO REGD or REGD NO REGD: Security B code is not registered (for security ECU communication) REGD: Security B code is registered (for security ECU communication) -
    SHIFT POS P2SW/NOT P or P NOT P: Shift lever is not in P position P: Shift lever is in P position -
  2. ACTIVE TEST 
    1. Connect the hand-held tester to the DLC3.
    2. Turn the ignition switch to the ON position and turn the hand-held tester on.
    3. Following the display on the hand-held tester, perform the "ACTIVE TEST".
    ACTIVE TEST

    Item Vehicle Condition/Test Details Diagnostic Note
    SECURITY INDIC Security indicator/OFF or ON -
    METER CHIME Meter chime/OFF or ON -
    METER BUZZER Meter buzzer/OFF or ON -
    NOT P-POS WARN Not P-position warning/OFF or ON Confirm that all doors are closed.
    BRAK CABLE WARN Break cable warning/OFF or ON Confirm that all doors are closed.
    UNMATH KEY WARN Unmatch key warning/OFF or ON Confirm that all doors are closed.
    STUCK WARN Stuck steering warning/OFF or ON -
    Meter Chime Continuously Meter chime continuously/OFF or ON -
scientia non olet · About LEMON Manuals