LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> LX 470 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition (2UZ-FE) >> VVT Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VVT Sensor: Installation

  1. INSTALL VVT SENSOR (for Bank 1) 
    1. Install the sensor with the bolt.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

    2. Connect the connector.
  2. INSTALL VVT SENSOR (for Bank 2) 
    1. Install the sensor with the bolt.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

    2. Connect the connector.
  3. INSTALL INTAKE MANIFOLD ASSEMBLY (See  INSTALLATION  ) 
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  5. ADD ENGINE COOLANT (See  REPLACEMENT  ) 
  6. CHECK FOR ENGINE COOLANT LEAKS 
    1. Check for the engine coolant leaks (See ON-VEHICLE INSPECTION ).
  7. PERFORM INITIALIZATION 
    1. Perform initialization (See INITIALIZATION ).
    NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals