LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> RX 330 AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield / WINDOWGLASS >> Power Window Regulator Motor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window Regulator Motor: Inspection

  1. INSPECT POWER WINDOW REGULATOR MOTOR (FRONT RH) 
    1. Remove the power window regulator motor.
    2. Apply battery voltage to the motor connector according to the table below.
      NOTE: Do not apply battery to any terminals except terminals 1 and 2.

    Standard 

    POWER WINDOW REGULATOR MOTOR (FRONT RH)

    Measurement Condition Specified Condition
    Battery positive (+) --> Terminal 1 (D)
    Battery negative (-) --> Terminal 2 (U)    		 Motor gear rotates clockwise
    Battery positive (+) --> Terminal 2 (U)
    Battery negative (-) --> Terminal 1 (D)    		 Motor gear rotates counterclockwise
    Fig 1: Identifying Power Window Regulator Motor Connector
    G04116036Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT POWER WINDOW REGULATOR MOTOR (FRONT LH) 
    1. Remove the power window regulator motor.
    2. Apply battery voltage to the motor connector according to the table below.
      NOTE: Do not apply battery to any terminals except terminals 1 and 2.

    Standard 

    POWER WINDOW REGULATOR MOTOR (FRONT LH)

    Measurement Condition Specified Condition
    Battery positive (+) --> Terminal 1 (D)
    Battery negative (-) --> Terminal 2 (U)    		 Motor gear rotates counterclockwise
    Battery positive (+) --> Terminal 2 (U)
    Battery negative (-) --> Terminal 1 (D)    		 Motor gear rotates clockwise
    Fig 2: Identifying Power Window Regulator Motor Connector
    G04116033Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSPECT POWER WINDOW REGULATOR MOTOR (REAR RH) 
    1. Remove the power window regulator motor.
    2. Apply battery voltage to the motor connector according to the table below.
      NOTE: Do not apply battery to any terminals except terminals 1 and 2.

    Standard 

    POWER WINDOW REGULATOR MOTOR (REAR RH)

    Measurement Condition Specified Condition
    Battery positive (+) --> Terminal 1 (D)
    Battery negative (-) --> Terminal 2 (U)    		 Motor gear rotates clockwise
    Battery positive (+) --> Terminal 2 (U)
    Battery negative (-) --> Terminal 1 (D)    		 Motor gear rotates counterclockwise
    Fig 3: Identifying Power Window Regulator Motor Connector
    G04116036Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT POWER WINDOW REGULATOR MOTOR (REAR LH) 
    1. Remove the power window regulator motor.
    2. Apply battery voltage to the motor connector according to the table below.
      NOTE: Do not apply battery to any terminals except terminals 1 and 2.

    Standard 

    POWER WINDOW REGULATOR MOTOR (REAR LH)

    Measurement Condition Specified Condition
    Battery positive (+) --> Terminal 1 (D)
    Battery negative (-) --> Terminal 2 (U)    		 Motor gear rotates counterclockwise
    Battery positive (+) --> Terminal 2 (U)
    Battery negative (-) --> Terminal 1 (D)    		 Motor gear rotates clockwise
    Fig 4: Identifying Power Window Regulator Motor Connector
    G04116033Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals