LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> RX 330 AWD >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control >> Steering Angle Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor: Installation

  1. INSTALL STEERING SENSOR 
    1. Install the steering sensor to the spiral cable.
      NOTE:
      • Install the claw securely.
      • Do not damage the claw.
        • Fig 1: Installing Steering Sensor To Spiral Cable
        G04090670Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
  2. ADJUST CENTER FRONT WHEEL 
  3. INSTALL SPIRAL CABLE (See  INSTALLATION  ) 
  4. ADJUST SPIRAL CABLE 
  5. INSTALL STEERING WHEEL ASSEMBLY (for Manual Tilt) (See  INSTALLATION  ) 
  6. INSTALL STEERING WHEEL ASSEMBLY (for Power Tilt and Power Telescopic) (See  INSTALLATION  ) 
  7. INSTALL STEERING PAD ASSEMBLY (See  INSTALLATION  ) 
  8. INSPECT STEERING WHEEL CENTER POINT 
  9. INSPECT STEERING PAD ASSEMBLY 
  10. INSPECT SRS WARNING LIGHT 

    HINT:

    See DIAGNOSIS SYSTEM

  11. INSPECT ABS WARNING LIGHT AND VSC WARNING LIGHT 

    HINT:

    See DIAGNOSTIC TROUBLE CODE CHART 

scientia non olet · About LEMON Manuals