Torque Specification

WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATION (BRAKE)

Part Tightened	N.m	kgf.cm	ft.lbf
Bleeder plug	11	112	8
Brake pedal sub-assy x Brake pedal support sub-assy	34.3	350	25
Brake pedal support sub-assy x Body	14.2	145	10
Brake pedal support sub-assy x Brake pedal support reinforcement	34.3	350	25
Front disc brake cylinder x Steering knuckle	123	1,254	91
Flexible hose x Disc brake cylinder assy rear	31	316	23
Rear disc brake cylinder mounting x Axle hub	105	1,071	77
Rear disc brake cylinder mounting x Disc brake cylinder assy rear	88	897	65
Flexible hose x Disc brake cylinder assy rear	31	316	23
Front speed sensor x Steering knuckle	8.3	85	73 in..lbf
Rear speed sensor x Axle hub	8.3	85	73 in..lbf
Skid control ECU assy set bolt	5.0	51	44 in..lbf
Junction block assy x Reinforcement	8.4	85	74 in..lbf
Brake master cylinder assy
Master cylinder solenoid set bolts	32	326	24
Brake master cylinder x Pin	7.8	80	69 in..lbf
Rod Operating adapter lock nut	26	260	19
Master cylinder push rod clevis lock nut	26	260	19
Brake booster pump x Brake booster accumulator	57	585	42
Brake master cylinder x Brake booster pump bracket No. 2	7.8	80	69 in..lbf
Master cylinder solenoid x Brake booster pump assy wire harness	2.9	30	26 in..lbf
Brake actuator tube No.1 union nuts	14 (15)	143 (155)	10 (11)
Brake line union nut	14 (15)	145 (158)	10 (11)
Brake master cylinder x Brake actuator bracket No.1	7.8	80	69 in..lbf
Brake master cylinder x Brake actuator bracket No.3	7.8	80	69 in..lbf
Brake master cylinder x Master cylinder reservoir	1.7	17	15 in..lbf
Brake master cylinder set nuts	14	145	10

( ): For use without SST