Torque Specification

WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATION (DIFFERENTIAL)

Part tightened		N.m	kgf.cm	ft.lbf
Differential carrier assy front (4WD)
Companion flange x Drive pinion		See (1GR-FE [4WD]COMPONENTS ) or (2UZ-FE [4WD]COMPONENTS )
Propeller shaft x Companion flange		88	897	65
Differential front mounting support No, 1 x Frame		137	1,400	101
Differential front mounting support No, 2 x Frame		137	1,400	101
Differential front mounting support No, 2 x Front differential tube assy		160	1,630	118
Differential front mounting support No, 1 x Differential carrier assy front		186	1,900	137
Differential front mounting support No, 2 x Differential carrier assy front		145	1,479	107
Differential front mounting support No, 3 x Differential carrier assy front		108	1,100	80
Front differential mount nut No. 1		87	887	64
Ring gear x Differential case		97	985	71
Differential carrier assy front x Breather tube		13	133	10
Differential carrier assy front x Side bearing retainer		50	510	37
Differential carrier assy front x Differential case		110	1,122	81
Drain plug		65	660	48
Filler plug		39	400	29
Front wheel		112	1,142	83
Differential carrier assy rear
Companion flange x Drive pinion		See OVERHAUL
Rear axle housing x Backing plate		66	670	48
Propeller shaft x Companion flange		88	897	65
Differential carrier assy rear x Rear axle housing		20	204	15
Differential carrier assy rear x Bearing cap		85	867	63
Differential case x Ring gear		97	985	71
Bearing cap x adjusting nut lock		13	130	9
Companion flange x Stud bolt	2WD Drive Type:	10	101	7.3
Differential RH case x Differential LH case		47	480	35
Differential vacuum actuator assy x Front differential tube assy	1GR-FE (4WD)	21	210	15
Drain plug		49	500	36
Filler plug		49	500	36
Rear wheel		112	1,142	83