Service Data
WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
1GR-FE:
SERVICE DATA SPECIFICATION (EMISSION CONTROL-1GR-FE)
| VSV for charcoal canister | - | |
| Resistance | at 20°C (68°F) | 25 - 30 Ω |
| - | at 100°C (212°F) | 32 - 42 Ω |
| Vacuum switching valve assy No.1 | - | |
| Resistance | at 20°C (68°F) | 26 to 30 Ω |
| Air fuel ratio sensor (Bank 1, Bank 2) | - | |
| Resistance | 1 (HT) - 2 (+B) | 1.8 to 3.4 Ω at 20°C (68°F) |
| Resistance | 1 (HT) - 4 (AF-) | No continuity |
| Heated oxygen sensor No.2 (Bank 1, Bank 2) | - | |
| Resistance | 1 (HT) - 4 (E1) | 11 to 16 Ω at 20°C (68°F) |
| Resistance | 1 (HT) - 2 (+B) | No continuity |
| Vapor pressure sensor | - | |
| Power source voltage | VC - E2 | 4.5 - 5.5 V |
| Power output voltage | PTNK - E2 | 3.0 - 3.6 V |
2UZ-FE:
SERVICE DATA SPECIFICATION (EMISSION CONTROL-2UZ-FE)
| VSV for charcoal canister | - | |
| Resistance | at 20°C (68°F) | 25 - 30 Ω |
| at 100°C (212°F) | 32 - 42 Ω | |
| VSV for EVAP | - | |
| Resistance | at 20°C (68°F) | 26 - 30 Ω |
| Heated oxygen sensor | - | |
| Resistance | 1 (HT) - 2 (+B) | 11 - 16 Ω at 20°C (68°F) |
| Resistance | 1 (HT) - 4 (E1) | No continuity |
| Heated oxygen sensor No. 2 (Bank 1) | - | |
| Resistance | 1 (HT) - 2 (+B) | 11 - 16 Ω at 20°C (68°F) |
| Resistance | 1 (HT) - 4 (E1) | No continuity |
| Heated oxygen sensor No. 2 (Bank 2) | - | |
| Resistance | 1 (HT) - 2 (+B) | 11 - 16 Ω at 20°C (68°F) |
| Resistance | 1 (HT) - 4 (E1) | No continuity |
| Pressure sensor | - | |
| Voltage | AIP-E2 | 1.0 to 2.2 V |
| Vacuum switching valve assy | - | |
| Resistance | 1-2 | 33 to 39 Ω at 20°C (68°F) |
| - | 1-Body ground | 10 MΩ or higher |
| - | 2-Body ground | 10 MΩ or higher |