Torque Specification
WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
1GR-FE:
TIGHTENING TORQUE SPECIFICATION (ENGINE CONTROL SYSTEM-1GR-FE)
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Throttle w/ motor body assy x Intake air surge tank | 11 | 112 | 9 |
| Air cleaner assy x Cylinder head cover sub-assy | 8.0 | 82 | 71 in..lbf |
| Air cleaner assy x Intake air surge tank | 8.0 | 82 | 71 in..lbf |
| V-bank cover x Air cleaner assy | 7.5 | 76 | 66 in..lbf |
| V-bank cover x Intake air surge tank | 7.5 | 76 | 66 in..lbf |
| Knock sensor x Cylinder block sub-assy | 20 | 204 | 15 |
| Water outlet pipe No.1 x Cylinder block sub-assy | 10 | 102 | 7 |
| ECM x Body | 13 | 133 | 10 |
| Accelerator pedal rod assy x Body | 5.0 | 51 | 44 in..lbf |
2UZ-FE:
TIGHTENING TORQUE SPECIFICATION (ENGINE CONTROL SYSTEM-2UZ-FE)
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Throttle body assy x Intake manifold | 14 | 143 | 10 |
| V-bank cover x Intake manifold | 7.5 | 80 | 66 in..lbf |
| Knock sensor x Cylinder block assy | 20 | 204 | 15 |
| Intake manifold x Cylinder head | 18 | 185 | 13 |
| V-bank cover bracket x Intake manifold | 7.5 | 76 | 66 in..lbf |
| Wire bracket x Intake manifold | 7.5 | 76 | 66 in..lbf |
| ECM x Body | 13 | 133 | 10 |
| Accelerator pedal rod assy x Body | 5.0 | 51 | 44 in..lbf |