Torque Specification

WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATION (EXTERIOR/INTERIOR TRIM)

Part Tightened		N.m	kgf.cm	ft.lbf
FRONT BUMPER
Front bumper reinforcement x Body		58	591	43
Front bumper cover x Radiator grille lower		7.5	77	66 in..lbf
Front bumper cover x Body	Bolt:	8.0	82	71 in..lbf
-	Screw:	3.0	31	27 in..lbf
Front bumper side support x Body		3.0	31	27 in..lbf
Front bumper reinforcement plate x Body		8.0	82	71 in..lbf
Front bumper side mounting bracket x Body	Nut:	5.0	51	44 in.lbf
-	Bolt:	8.0	82	71 in.lbf
REAR BUMPER
No.2 rear bumper reinforcement x Body		25	255	18
Rear bumper side mounting bracket x Body		8.0	82	71 in.lbf
Rear bumper bar reinforcement x Body		5.0	51	44 in.lbf
Rear bumper end retainer x Body		3.0	31	27 in..lbf
Rear bumper retainer upper x Body		3.0	31	27 in..lbf
Rear bumper cover x Body	Bolt:	8.0	82	71 in..lbf
-	Screw:	5.0	51	44 in..lbf
ROOF HEADLINING
Front seat outer belt x Body		42	430	31
Rear seat outer belt x Body		42	430	31
REAR SPOILER
Rear spoiler x Back door		7.0	71	62 in..lbf
Rear spoiler x Center stop lamp		2.5	25	22 in..lbf
ROOF DRIP SIDE FINISH MOLDING LH
Roof rack bracket front LH x Body		10.0	102	7.4
LH STEP SUB-ASSY
Side step bracket x Body		19.5	199	14
Side step bracket x LH Step sub-assy		5.0	51	44 in..lbf
OUTSIDE MOLDING
Rear quarter outside molding sub-assembly x Body		5.0	51	44 in..lbf
Front wheel opening extension sub-assembly x Body		5.0	51	44 in..lbf
Step sub-assembly x Body		5.0	51	44 in..lbf
Rocker panel molding sub-assembly x Body		5.0	51	44 in..lbf
Front door outside molding sub-assembly		5.0	51	44 in.lbf