Torque Specification
WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
1GR-FE:
TIGHTENING TORQUE SPECIFICATION (IGNITION-1GR-FE)
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Spark plug x Cylinder head | 20 | 204 | 14 |
| Ignition coil x Cylinder head cover | 10 | 102 | 7 |
| VVT sensor x Timing chain cover sub-assy | 8.0 | 82 | 71 in..lbf |
| V-bank cover x Intake air surge tank sub-assy and Air cleaner assy | 7.5 | 76 | 66 in..lbf |
| Crankshaft position sensor x Cylinder block | 10 | 102 | 7 |
| V-ribbed belt tensioner and Cooler compressor assy | 25 | 255 | 18 |
| Engine under cover assy rear x Frame assy | 29 | 296 | 21 |
2UZ-FE:
TIGHTENING TORQUE SPECIFICATION (IGNITION-2UZ-FE)
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Spark plug x Cylinder head | 20 | 204 | 15 |
| Ignition coil (with igniter) x Cylinder head cover | 7.5 | 76 | 66 in..lbf |
| Camshaft position sensor x LH cylinder head | 7.5 | 80 | 66 in..lbf |
| Crankshaft position sensor x Oil pump | 6.5 | 65 | 58 in..lbf |