Height Control Sensor: Installation

INSTALL HEIGHT CONTROL SENSOR SUBASSEMBLY FRONT LH
1. Install the height control sensor FR LH with the 2 nuts.
  Torque: 7.8 N*m (80 kgf*cm, 69 in.*lbf)
  
  Fig 1: Installing Height Control Sensor FR LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the height control sensor onto the lower arm with the torx nut.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
3. Connect the connector.
INSTALL FRONT WHEELS
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
ADJUST VEHICLE HEIGHT

Fig 2: Identifying Torx Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HEIGHT CONTROL SENSOR SUBASSEMBLY REAR LH (2WD DRIVE TYPE)
1. Install the height control sensor RR LH with the "torx" nut and the 2 nuts.
  Torque: 7.8 N*m (80 kgf*cm, 69 in.*lbf) (Nut) 5.4 N*m (55 kgf*cm, 48 in.*lbf) ("Torx ")
  
  Fig 3: Installing Height Control Sensor Subassembly Rear LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HEIGHT CONTROL SENSOR SUBASSEMBLY REAR LH (4WD DRIVE TYPE)
1. Install the height control sensor RR LH with the "torx" nut and the 2 bolts.
  Torque: 7.8 N*m (80 kgf*cm, 69 in.*lbf) (Bolt) 5.4 N*m (55 kgf*cm, 48 in.*lbf) ("Torx" nut)
ADJUST VEHICLE HEIGHT

Fig 4: Installing Height Control Sensor Subassembly Rear LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002