VVT Sensor: Removal

REMOVE ENGINE UNDER COVER NO. 2
1. w/ engine under cover No. 2.
  1. Remove the clip, 2 screws and 2 bolts
  2. Slide the engine under cover No. 2 toward the rear to detach it from the retainers, and then remove the engine under cover No. 2.
    
    Fig 1: Removing Engine Under Cover No. 2
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE AIR CLEANER INLET NO. 2 (See REMOVAL )
REMOVE AIR CLEANER ASSEMBLY (See REMOVAL )
REMOVE VVT SENSOR
1. Disconnect the 2 VVT sensor connectors.
2. Remove the 2 bolts, and then remove the 2 VVT sensors.
Fig 2: Removing VVT Sensors (LH Bank/RH Bank)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002