Torque Specifications
TORQUE SPECIFICATIONS (POWER STEERING)
| Part tightened | N*m | kgf*cm | ft*lbf |
|---|---|---|---|
| VANE PUMP ASSEMBLY | |||
| Pump bracket front x Housing front | 43 | 438 | 32 |
| Housing rear x Housing front | 24 | 245 | 18 |
| Pump bracket rear x Housing rear | 43 | 438 | 32 |
| Pressure port union | 83 | 846 | 61 |
| Suction port union set bolt | 13 | 133 | 10 |
| Pump pulley set nut | 44 | 449 | 32 |
| Pump assembly set bolt | 43 | 438 | 32 |
| Pressure feed tube assembly set union bolt | 52 | 525 | 38 |
| Oil pressure switch | 21 | 214 | 15 |
| VANE PUMP ASSEMBLY (From September, 2003) | |||
| Pump bracket front x Housing front | 44 | 449 | 32 |
| Housing rear x Housing front | 24 | 245 | 18 |
| Pump bracket rear x Pump bracket front | 44 | 449 | 32 |
| Pressure port union | 83 | 846 | 61 |
| Suction port union set bolt | 13 | 133 | 10 |
| Pump assembly set bolt | 43 | 438 | 32 |
| Pressure feed tube assembly set union bolt | 52 | 525 | 38 |
| Oil pressure switch | 21 | 214 | 15 |
| POWER STEERING LINK ASSEMBLY | |||
| Control valve housing set bolt | 21 | 214 | 15 |
| Control valve shaft lock nut | 25 | 250 | 18 |
| Rack housing cap | 59 | 597 | 43 |
| Rack guide spring cap lock nut | 51 (69) | 515 (699) | 38 (51) |
| Rack x Rack end sub-assembly | 50 (84) | 505 (851) | 37 (62) |
| Tie rod assembly lock nut | 74 | 750 | 55 |
| Turn pressure tube union nut | 12 (13) | 122 (127) | 9 (9) |
| Steering link assembly set bolt | 70 | 714 | 52 |
| Pressure feed tube assembly union nut | 22 (24.5) | 230 (250) | 16 (18) |
| Pressure feed tube clamp set bolt | 9.8 | 100 | 87 in.*lbf |
| Pressure feed tube clamp set nut | 9.8 | 100 | 87 in.*lbf |
| Stabilizer bracket No.1 x Suspension crossmember | 16 | 163 | 12 |
| Intermediate shaft assembly x Steering link assembly | 35 | 360 | 26 |
( ): For use without SST